Clinisept+
Frequently Asked Questions

General FAQ's

Clinisept+ Prep & Procedure, and Clinisept+ Aftercare use exactly the same chemistry, the only difference is that they dispense it in a different manner.

Clinisept+ Prep & Procedure is available with either a pump dispenser or a trigger spray.

Clinisept+ Aftercare is a ‘take home’ product for use by the patient once they have left the clinic. The finely atomising spray head enables clients to maintain high levels of hygiene over a treated area, without touching the skin.

Prior to using Clinisept+ products ensure the skin is clean and free from all contaminants such as make-up.

Clinisept+ Prep & Procedure is intended for use by a clinician before, during and after all procedures to cleanse the skin and to ensure aseptic conditions are maintained. It should be applied by soaking a pad or gauze and wiping onto the skin. The whole area to be treated should be thoroughly wetted with Clinisept+ Prep & Procedure. Because Clinisept+ causes no irritation, it can be re-applied during and after the procedure to maintain high levels of hygiene throughout.

Clinisept+ Aftercare, should be used by the patient following all procedures that have caused damage to the dermis. It should be applied two to three times a day, until the treated area has completely recovered. It can be applied by spraying on directly or by soaking a pad or gauze and wiping onto the skin.

The active ingredient in Clinisept+ is sodium hypochlorite. A patent pending chemical process is used to trigger a chemical reaction which converts the hypochlorite into an ultra-pure, stabilised hypochlorous solution. In fact, Clinisept+ has been proven to contain more than 90% pure hypochlorous – far exceeding the purity of any competitor product claiming to contain hypochlorous.

Hypochlorous is the same chemistry that powers the human immune system. It is produced by the white blood cells in the body to combat infection and is widely acknowledged as the most effective disinfection agent known, owing to its ability to kill bacteria, viruses, fungi and spores.

Clinisept+ is so effective because of the purity of the hypochlorous content. Despite it’s efficacy, hypochlorous is not absorbed by human skin cells. It has a skin neutral pH and contains no alcohol, petroleum, lanolin, oils or parabens. It is non-toxic and non-irritant to human skin and is even non-cytotoxic to human skin cells.

Most cleansers intended for use on skin, are weak poisons.  Whilst they can be effective at killing some pathogens, they also affect healthy skin cells and inhibit skin regeneration. Clinisept+ is different in that it uses an oxidising method of action which causes no harm to human skin, even to re-growing skin cells.

Clinisept+ has several in use benefits: In clinic, its primary purpose is to highly effective cleaning and provide antimicrobial protection, (both to patient and clinic staff). However, Clinisept+ is also highly effective in reducing the appearance of redness and swelling, and provides a cooling sensation to treated skin.

When used following a procedure as an aftercare, Clinisept+ keeps treated areas clean and unencumbered from the contamination that inhibits skin health, resulting in high quality and rapid skin recovery.

Clinisept+ products are very safe to use and have been proven non-toxic, non-mutagenic, non-irritant to skin and non-irritant to eyes. Follow the instructions for usage on the bottle and keep out of the reach of children.

No. Clinisept+ has been subjected to comprehensive dermatological testing and has been found to cause no contraindications.

Phosphoric acid is used in the manufacturing process to form the hypochlorous in Clinisept+. This process produces a pH that matches that of human skin and which is far less acidic than most carbonated soft drinks.

Clinisept+ should be stored out of the reach of children and away from direct sunlight. If you wish to enhance its cooling sensation it can be kept in the fridge if desired.

Clinisept+ is safe for drain disposal.

All Clinisept+ bottles are fully re-cyclable, so please do ensure they are re-cycled responsibly.

Clinisept+ is made in the UK in a dedicated ISO 13485 Medical Device facility. This facility is also accredited with ISO 9001.

Aesthetic FAQ's

Clinisept+ Prep & Procedure is usually dispensed into a disposable galipot and applied with a sterile gauze.

Clinisept+ Aftercare may be sprayed directly onto the intended area, or sprayed onto a disposable pad and wiped onto the area.

Clinisept+ is used extensively in injectables applications with excellent results. It should be applied to the skin before, during and after the process.

Clinisept+ is available from all leading aesthetics distributors and from aesthetics clinics all over the UK. If you are an aesthetic clinician and wish to purchase Clinisept+ please contact our distributor, Aesthetic Source on www.aestheticsource.com.

If you wish to purchase Clinisept+ for personal use, please contact your local aesthetic clinic.

It is also available in many geographies outside of the UK.

Yes, Clinisept+ is available in many geographies outside of the UK and we will shortly be publishing a list of international distributors. Please contact us if you are interested in becoming a distributor for Clinisept+.

Dental FAQ's

No. Clinisept+ Mouthwash uses the same unique hypochlorous chemistry as the other Clinisept+ products, but at a lower concentration. Clinisept+ Mouthwash has been developed especially for oral usage.

No. Clinisept+ Mouthwash contains no chlorhexidine or alcohol – and neither does it contain any colouring, flavouring or fragrance. Clinisept+ Mouthwash only contains a very high purity hypochlorous solution.

Clinisept+ Mouthwash can be purchased from many leading dental practices or it can be purchased directly from Clinical Health Technologies Ltd. To purchase directly please call 0800 252172 and select option 1.

Podiatry FAQ's

Clinisept+ provides several benefits over traditional skin cleansing chemistries in podiatry applications. As well as delivering highly effective cleansing due to its excellent antimicrobial efficacy, Clinisept+ is gentle on the skin and doesn’t sting or cause irritation. Because of it’s skin neutral pH it can also be used during a procedure to keep the area clean.

You may have been recommended to use Clinisept+ Aftercare by your podiatrist or chiropodist. If so, follow their recommendations on usage. You may also wish to use Clinisept+ as part of your daily foot hygiene regime. In this instance, we recommend it is applied after showering or bathing by spraying directly onto the toes and feet. Once applied, either allow to dry naturally or wait for a minute and then wipe any excess off with a clean tissue or paper towel.

Clinisept+ is available through the UK’s top podiatry distributors and though leading podiatry clinics. It is also available to purchase directly from Clinical Health Technologies Ltd by calling 0800 252172 and selecting option 1.